Translate

Friday, January 18, 2019

2019 US-Canadian Mediumwave Pattern Reference Is Here

Editor's note: The newest version of the pattern set (2024) is available. See the link at the upper right of this page.

The 2019 US-Canadian Mediumwave Pattern Reference for all stations is now available. Find the download link at upper right. Remember, the links change each time a new set is uploaded. Always look to this RADIO-TIMETRAVELLER site for the current link. Download is 52 MB.

DOWNLOAD LINKS

Media Fire link here.

If you download from the Media Fire link, be sure to click the DOWNLOAD button.


The Media Fire site is ad-supported and has several ad links on the page and will also issue an ad pop-under.

The other link at the upper right of this page is to Tomas Hood's NW7US site. It is ad-free. Thank you Tomas for mirroring this download. Both downloads are the same.

INSTALLING

The maps are HTML-based, so no regular install is necessary. Simply unzip the downloaded file and click on the individual map file to run. The map will open up in your web browser. They are self-contained, with image icons embedded right into the code. You must have an internet connection to view the maps.

IMPROVEMENTS FOR 2019

1. The previous 2016 map version became crippled due to Google's new precondition for all Google Map usage now requiring a user key. I have applied for and received the requested key. It allows a fixed amount of map-usage bandwidth. All maps should now display fully.

Note: Google may throttle map-usage bandwidth based on excessive use. Whether this will happen is unknown at this time.

2. Skywave signal maps have been totally recoded for 2019. Many months of coding and testing were involved. Predicted signal levels are calculated in accordance with current ITU methods of recent years (1999 onward). The following new parametrics are now additionally considered in the skywave calculation:

   * Hourly transitional loss variance from sunset to sunrise.
   * Seasonal gain or loss, January - December.
   * Diurnal enhancement at the sunrise and sunset period.
   * Winter daytime skywave enhancement (only on maps created for times during the day).
   * Daily seasonal nighttime skywave enhancement.
   * Take off angle variances for stations at relatively close distances (experimental).

3. Colored plot (yellow) introduced for groundwave 0.1 mV/m level.

4. Small changes made to the map's title bar heading.

5. Unlimited, Daytime, and Critical Hours plots are at the 1.0 and 0.1 mV/m levels. Skywave this year is set at the 0.15 mV/m level. In all cases except for the nighttime graveyard stations, levels have been chosen to minimize pattern overlap and to more closely follow those which might be helpful to the mediumwave DXer.

ABOUT THE MAPS

Included is a complete set of GoogleMap-based, HTML-driven maps which show the most current pattern plots of all licensed US and Canadian mediumwave broadcast stations from 530 - 1700 KHz. The set includes all frequencies for the indicated services: Unlimited, Daytime, Nighttime, and Critical Hours. Individual maps are grouped by channel frequency: 540, 550, 560, .. 1700 KHz, etc. Data for the plots in this offering is based on the current FCC and Industry Canada databases available at the time of its creation (January 16, 2019).

The daytime map series, in two parts, shows expected groundwave coverage patterns for Unlimited and Daytime (part 1), and Critical Hours (part 2) operations. Daytime signal patterns represent groundwave coverage at two levels, out to the 1.0 and 0.1 millivolts per meter contours. The choice of these levels is made in order to more closely match those which might be helpful to the mediumwave DXer. Note that daytime reception of signals out beyond the depicted 0.1 mV/m pattern is very possible, and in fact likely for the DXer. The contour line represents a signal strength at the station's extreme fringe distance, a level usually received on a sensitive portable radio with a low ambient local-noise level. I have chosen this signal level to give a good representation of what can be received by most DXers during sunlight hours.

The nighttime map series shows expected skywave coverage patterns for Unlimited and Nighttime operations. Nighttime signal patterns represent the standard SS+6 (sunset plus 6 hours, or approximately midnight Central Standard Time), 50% signal probability at 0.15 millivolts per meter. Note also that nighttime reception of signals out beyond the depicted pattern is very possible, and in fact quite likely for a skywave signal. The maps represent a signal strength between distant and fringe, a level generally easily received at night on most portable radios. I have chosen this signal level to give a good representation of what should be fairly easily received by most DXers on an average evening. The nighttime signal probability of 50% means that the signal will be received at this level approximately 50% of the time at Central Standard Time.

HOW THEY ARE PRODUCED

Using the actual FCC database files, Radio Data MW will auto-generate an interactive HTML pattern map, showing the pattern plots for all stations included at the discretion of the user. A complete set of mediumwave pattern maps can be generated in about five hours of processing time. Processing time has increased by nearly two hours in 2019 due to enhanced skywave calculations and other upgrades.

For daytime signal maps, Radio Data MW generates a real pattern plot based on transmitter power, antenna array efficiency and directivity, ground conductivity and ground dielectric constant of the path to the receiver. Increased conductivity of water paths over the Great Lakes are also accounted for. It display actual (but approximate of course) signal level boundaries for Local, Distant, Fringe, Extreme mV/m levels, or any custom mV/m level chosen by the user.

For skywave signal maps, predicted signal levels are calculated in accordance with current ITU methods of recent years (1999 onward). A number of parametrics are now analyzed and accounted for in the calculation, namely diurnal and seasonal changes, and daily sunrise and sunset enhancements to the signal. The process is rather complicated.

The online Google Maps API is used to generate and plot each station on a map of the US. An accurate flag pin is placed at each transmitter location, and in satellite view may be zoomed in to see the actual transmitter site. Map flags are color-coded to indicate Unlimited (light red), Daytime (yellow), Nighttime (black), and Critical Hours (grey) services. Each flag has a tooltip-type note, and when hovered over with the mouse will display a note on the station.

A pattern plot for each station is generated and displayed. Each pattern can be calculated using standard formulas used by the FCC or ITU to compute the base values at one kilometer, and field strength formulas at distance based on the works of many people over the years. See Field Strength Calculations: A History and Field Strength Calculator One, previously posted on RADIO-TIMETRAVELLER. See the RADIO-TIMETRAVELLER blog at: http://radio-timetraveller.blogspot.com/

An accurate ray path can be drawn from all transmitters to a user-specified receiving location by inputting latitude-longitude coordinates on the heading bar at the top of the map. Super-imposed on the pattern plots, the ray paths show the listener where he or she falls on each station's pattern, a handy guide to knowing where you stand.

Individual station plots can be turned on or off by a checkbox. Click the station flag and you will see the option in a pop-up balloon. Check or uncheck the box, then click the ReDraw button. The entire plot set can also be turned on or off by buttons at the top of the map.

Included in each station's flag tooltip are FCC facility ID, engineering (application) ID, and distance of the station from the home latitude-longitude. Of interest to the DXer, by setting the home location latitude-longitude to your location and redrawing the map, each flag tooltip will have the distance from your location to the station.

SPECIAL NOTE ON SKYWAVE PLOTS

The skywave calculation has been totally overhauled and enhanced to more reflect actual signal expectations across the U.S. at night. The fact of life is that pattern overlay occurs on many frequencies. Simply select the plots you want to analyze. Check the No Plots checkbox then ReDraw to turn off all plots. Click any station flag and check the box to plot that station then ReDraw.

You will occasionally see a skywave plot which looks much smaller than surrounding plots. This is a case where the station's skywave signal did not meet the mV/m threshold (0.15 mV/m). The groundwave plot level is substituted in this case. The station does in fact have a skywave component, however small, it will be measurably less than the 0.15 mV/m level (very weak). It may be receivable!

The darker line defining the outer edge of the skywave plot shows the location of the 0.15 mV/m signal point at all compass points. Note that skywave signal strength does not decrease linearly with distance from the station. From the station outward, the signal strength will generally increase to a point usually 200-400 kilometers distant where it will peak, then decrease somewhat linearly from there.

Also note that the atmospheric background noise level on the mediumwave band is generally considered to be approximately 36 dBu (dBu in this case = dBµV/m), equivalent to 0.063 mV/m. Signals below that level will not be heard unless they fade up above the noise. A gain or directional antenna can be used to increase signal strength while limiting or even reducing the overall atmospheric background noise level.

Image below is an example of the 1370 KHz daytime ground contour map.

Hope you enjoy.

Daytime Ground Contour Map 1370 KHz

19 comments:

Kilo Watt said...

Great job! Thanks so much Bill for such a fine program.

RADIO-TIMETRAVELLER said...

Thanks Kilo Watt!

Bill

Unknown said...

Hi Bill,

That's a great set of Maps you created. THanks for all the hard work.


Dave Dybas

Jim Hicks said...

How do I change the default home lat/long once, not 280+ times?

RADIO-TIMETRAVELLER said...

Thank you Dave.

Bill

RADIO-TIMETRAVELLER said...

Jim,

The default lat-lon of each map must be changed individually each time, if that's what you are asking.

Bill

Unknown said...

Bill, Thank you for this helpful program and all the work that you put in to it.

-Zyg-

Anonymous said...

Hey bill, thank you very much for your maps and the work involved in them. I am a big AM DX'er and I've found them to be very useful..... sometimes i hear a signal, wonder how/why and then pull up your maps and it gives me a good, wider, bigger view then a certain other commercial map site or two give.

Paul Walker
walkerbroadcasting@gmail.com

RADIO-TIMETRAVELLER said...

Thanks Paul and everyone for your kind comments! I'm glad the maps are helpful!

Bill

marc said...

Would be nice for EU/AF zone ...

RADIO-TIMETRAVELLER said...

Hi marc,

Yes, I wish this too. But unfortunately without specific tower engineering data on EU/AF stations it is impossible. An accurate Mexico reference would also be a plus.

Bill

Anonymous said...

Bill,

I do know both OfCom (UK) and the ACMA (Australia) publish data on their licensed AM stations

I'm pretty sure the Australia version hes co-ordinates.. but not sure either includes just what the directional pattern data is

RADIO-TIMETRAVELLER said...

Thanks Paul. I may have a look at these at some point.

Bill

Anonymous said...

Just search Ofcom TxParams and ACMA Australia AM Stations by frequency to find the files.

RADIO-TIMETRAVELLER said...

Thanks for the info Paul.

Bill

K7DWI - Art said...

Hi Bill,
Thank you again for putting this out there for us MW DX'ers.
I pass the link to my DXing friends.
Also thanks again for the Prescott Valley run....
unfortunately, I just moved to Grants Pass Oregon :)
Still use it.
73 Art now K7DWI

RADIO-TIMETRAVELLER said...

Hi Art,

Nice to hear from you. Wow, you moved! And a long ways too! Hope the DXing from Oregon is good. Maybe you'll hear Pacific DX better.

I've been gone for most of the summer back east where my sister lives, visiting her on her farm. I should be back home in early September.

I thought I had your email address but can't find it. Shoot me an email. Maybe include your new lat-lon coordinates too. ;-)

Bill

Fumiaki MINEMATSU said...

Hi Bill-san, Thank you very much for sharing such wonderful MW patterns for us.
We respect your great effort to complete this work.
From this month, TPDX season is going to start here in Japan. Thanks to the low solar activity, we want to catch east-coast MW stations of the U.S and Canada this year too. Last year we could catch WBZ(Boston) and WPTX(Maryland). We hope to get a signal from New York this year.
This reference maps will help you a lot.
Thank you very much

Fumiaki from Japan
https://eureka-fumi.blogspot.com/

RADIO-TIMETRAVELLER said...

Fumiaki,

Thank you very much for your comments. I'm so glad these maps are helpful to you and your fellow DXers.

Best of DX this season!

73s,

Bill
RADIO-TIMETRAVELLER